Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13580846
- Product Categories
- Friendly Links
Information Name: | 1030 shaker, triple electromechanical (certified), Shangqiu shaker |
Published: | 2014-11-17 |
Validity: | 0 |
Specifications: | Any |
Quantity: | |
Price Description: | |
Detailed Product Description: | 1030 shaker, triple electromechanical (certified), Shangqiu shaker provided by the Electrical and Mechanical Services Ltd. Xinxiang triple. Xinxiang City triple Electrical Co., Ltd. (www.xxsljd.com) is specialized in the "vibrating machinery, mining equipment, feeding machinery, electrical exciter, crusher, dryer," the business, the company adhering to the "honesty, hard service" concept, to provide you with the highest quality products and services. Welcome to inquire! Contact: Zhang Wenjun. Horizontal vibration motor excitation force of regulation: (1) protective cover fastening screws loosen and remove the shield at both ends; (2) the exciting force is less than MV50-2, http: //www.zds518.com,MV50- 4 pzs shaker, MV50-6, MV30-8 vibration motor (not included in this four specifications), the outer eccentric adjustable block gzs shaker, surface mounted centrifugal force marked the largest percentage of the scale, in the eccentric fixed block, use the fastening bolts pressed on the vibration motor shaft. Both end surfaces of the shaft engraved baseline. Loosen the bolts on the outer sides of the eccentric, eccentric outer sides with the scroll, so the shaft alignment reticle exciting force eccentric ruler engraved lines on the outside, to the required excitation force, tighten the outer eccentric block bolts, fitted with protective cover; (3) the centrifugal force that is greater than or MV50-2, MV50-4, MV50-6, MV30-8 vibration motor (including this four specifications), outer eccentric block fixed block, keyed by the shaft, can not scroll. Adjustable eccentric block within the block, with the outer surface marked with the largest percentage of the ruler exciting force, the use of captive bolt is pressed against the vibrating motor shaft. Loosen the sides of the inner eccentric bolts, eccentric block in the same direction on both sides of the scroll so exciting force within the eccentric ruler engraved lines on the alignment slits on the outer eccentric, to the required excitation force, Tighten the inner eccentric bolts, fitted with protective cover; when the cuttings in a mesh sieve damage accumulation and fast 1000 shaker, we should increase the vibration amplitude; with sprayed water will screen and cuttings, reducing cuttings viscosity, but this method allows only for the case of the addition of water; adjust the angle of the sand discharge outlet end of the screen downward, beneficial cuttings discharged by gravity, but may cause the pulp to run; sieve mesh replacement or adjustment unit flow sieve shaker to ensure the flow of the drilling fluid near the mesh point of the outlet stopper, so that the smooth discharge of the cuttings in the drilling fluid lubrication. These are just a shale shaker screen, and a portion corresponding to the excessive damage treatment method, in order to solve this problem, we need to carry out maintenance on the shale shaker, but also at work and timely identify problems and appropriate solutions. |
Admin>>>
You are the 14304 visitor
Copyright © GuangDong ICP No. 10089450, Xinxiang City triple Electrical Co. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 14304 visitor
Copyright © GuangDong ICP No. 10089450, Xinxiang City triple Electrical Co. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility